Загрузка...
+7(978) 941 09 90

M702-705

  1. M702 performs the cutting cycle in two steps through two consecutive positioning operations of the same strip.
  2. Disc-holder head comprises the motor-spindle assembled onto a support that is tilted, for lifting and lowering movements, through a pneumatic system.
  3. "The head slides through three pairs of wheels along two chrome plated hardened and ground bars, that are mounted onto a strong stationary bridge.
  4. Cut and return strokes are driven through a gear-motor operated rack-pinion system with speed adjusted through inverter and visualized on display.
  1. M702 is manufactured in the types for marble or for granite.
  2. "The machine is manufactured as well in the special version the production of finished elements.
  3. Such version is equipped with a strip aligning unit that guarantees perfectly orthogonal cuts, with a precision conveyor belt positioning control to provide precise length dimension and with a reading unit to allow for the automatic elimination of strip defective parts previously evidenced through an optic pen by operator.
  1. M705, that is usually employed to feed granite finishing lines, is featured with a cycle time lower than 20 sec that, with 3400 mm long strips, allows for line operation at 10

mt/ min conveyor belt speed.

  1. first head is stationary; second head slides along two chrome plated hardened and ground bars, that are mounted onto the bridge and positions automatically an quickly on basis of entering strip length. To allow for both strip ends elimination with one cutting stroke only.
  2. Head displacement isdriven through a gear- motor operated rack-pinion system and head positioning is controlled through encoder.
  3. For cut and return strokes the bridge slides along oil bath guidesdriven by two ^nchronized rack/ pinion systems operated by a gear motor with speed adjusted through inverter and visualized on display.
  1. "The base is made in large thickness normalized steel work. All the surfaces matching the upper structures are machined.
  2. "The conveyor belt is driven through a roller that is operated through an encoder controlled inverter speed adjusted gear-motor.
  3. "The idle roller that controls the conveyor belt is equipped with tension device.
  4. Special fixed guides prevent the conveyor belt from harmful deformations by keeping it totally adherent to the sliding plane.
  5. Disc-holder headscomprise the motor-spindle assembled onto a support that is tilted, for lifting and lowering movements, through a pneumatic system.

iLTium

 

DATITECMCI

TECHNICAL DATA

UM

M702MV

M7 02GV

 

M ateriale lavorato

Rocessed material

 

Marmo/ Marble

Granito/ Granite

Lunghezza massima lavorata

Max. processed length

mm

3500

3500

Larghezza massima lavorata

Max. processed width

mm

650

650

Spessore massimo lavorato

Max processed thickness

mm

50

50

N umero dischi

Discs number

nr

1

1

M otore disco

Disc motor

kW

5,5

7,5

M otore taglio ritorno

Cut -return motor

kW

0,5

0,5

M otore nastro trasportatore

Conveyor belt motor

kW

1,1

1,1

Diametro disco

Disc diameter

mm

400

400

Velocita taglio ritorno

Cut - return speed

m / min

0,4/12

0,4/12

Velocita nastro trasportatore

Conveyor belt speed

m / min

3/25

3/25

Fbtenza installata

Installed power

kW

7

9

Acqua di raffreddamento (pressione minima 1,5 bar)

Cooling water
(1,5 bar minimum pressure)

I / min

15

15

Aria compressa (pressione minima 6 bar)

Compressed air
(6 bar minimum pressure)

NL/ min

25

25

Lunghezza macchina

Machine length

mm

4100

4100

Larghezza macchina

Machine width

mm

2100

2100

Altezza macchina

Machine height

mm

1950

1950

Massa approssimativa

Approximate mass

kg

3300

3300

 

 


  1. The machine front is protected with sliding transparent doors
  2. "The control panel, located in handy position, is equipped with all controls for the programming of the processing cycle.
  3. The remote electric panel is dust and water proof in compliance with the I P54 standards.
  4. The entire machine surface is protected with two layers of epoxy paint applied after the sandblasting operation.

DATITECMCI

TECHMGALDAm

UM

M7 0 5GV

Materiale lavorato

Rocessed material

 

Granito/ Granite

Lunghezza lavorata

Rocessed length

mm

1400/3500

Larghezza massima lavorata

Max. processed width

mm

650

Spessore massimo lavorato

Max processed thickness

mm

50

Numero dischi

Discs number

nr

2

Motori disco

Disc motor

kW

11

M otore taglio ritorno

Cut -return motor

kW

0,37

Motore nastro trasportatore

Conveyor belt motor

kW

1,1

Motore spostamento disco in entrata

Entry disc displacement motor

kW

0,75

Diametro disco

Disc diameter

mm

350

Velocita taglio ritorno

Cut - return speed

m / min

0,4/10

Velocita nastro trasportatore

Conveyor belt speed

m / min

0,5/23

Corsa laterale disco in entrata

Entry disc displacement stroke

mm

2200

Fbtenza installata

Installed power

kW

25

Acqua di raffreddamento (pressione minima 1,5 bar)

Cooling water
(1,5 bar minimum pressure)

I / min

30

Aria compressa (pressione minima 6 bar)

Compressed air
(6 bar minimum pressure)

NL/min

50

Lunghezza macchina

Machine length

mm

5400

Larghezza macchina

Machine width

mm

2240

Altezza macchina

Machine height

mm

2380

Massa approssimativa

Approximate mass

kg

6000

Foto, disegni e dati tecnici sono solo indicativi.
Ci risetviamo il diritto di apportare, senza preawiso, eventuali modifiche che costituiscano miglioria per le nostre macchine.

 

Pictures, drawings and technical data are merely indicative and are not binding.
We reserve the right to effect any modifications to our machines without prior notice should these be deemed necessary for machine excellence.